• If the videos have been deleted or the memory card has been formatted, they cannot be recovered.
• To prevent loss, we recommend regularly downloading and saving important videos to another device before they are overwritten.

1. Go to Settings on your dashcam.
   
2. Find and select “Set Rear View Default.”
   
3. Once enabled, the dashcam’s screen will display the rear camera feed by default while driving.
   

If your recordings have no sound, go to Camera Settings > Recording and make sure the Sound Recording option is turned on.

This usually happens when the red reverse trigger wire from the rear camera is connected incorrectly. The wire should be connected to the reverse light wire, which only has power when the car is in reverse gear. Once connected correctly, the dash cam will switch to the rear view only when reversing.

If you see this message, try the following steps:

1. Reset the dash cam through the app.
   
2. Remove and reinsert the memory card.
   
3. Try another compatible memory card if the issue occurs with the provided card.
   

If the problem persists, please contact our support team at support@pelsee.com.

If you encounter this issue, try the following steps:

1. Remove and reinsert the memory card.
   
2. Reset the dash cam through the app.
   
3. Try another compatible memory card if the issue occurs with the provided card.
   

If the problem persists, please contact our support team at support@pelsee.com.

If you see this message, try the following steps:

1. Remove the memory card and ensure both the card and the slot are clean and free of dust or dirt.
   
2. Power off the dash cam, then power it back on and reinsert the card.
   
3. If the issue persists, reset the dash cam through the app or try another compatible memory card (if the problem occurs with the provided card).
   
4. You can also insert the card into a card reader to check if it is recognized by your computer.
   

If the problem continues, please contact our support team at support@pelsee.com.

• The recording indicator turns yellow when the dash cam is recording a locked video.
• If videos are being locked too frequently, try lowering the collision sensitivity in the app.
  
• Words like “lock” can sometimes accidentally trigger the voice command to lock a video. Consider reducing the voice command sensitivity if this happens often.

For P10, P10Pro, P12Pro, P12Pro Max, you can verify whether the lines are present in the recorded videos. If the lines are visible only on the screen and not in the recordings, please reach out to our support team at support@pelsee.com providing your concern, order receipt, and a photo illustrating the screen issue to initiate a warranty claim.

For P10, P10Pro, P12Pro, P12Pro Max, Please navigate to the Camera settings and locate the Rear Mirror or Mirror Rear View feature. Disable this function to switch the direction back to normal.

For, P10, P10Pro, P12Pro, P12Pro Max

1. Please ensure that all wire connections are securely tightened without any damage, paying particular attention to the 4-pin connector on the rear cam cable.
2. If the first tip does not work, please give a voice command of "show rear cam" and observe if there is a notification on the screen indicating "please plug in the rear camera." Then please reach out to our support team at support@pelsee.com with your concern, order receipt and result of the voice command for a warranty claim.

You may go to the Camera setting, and enable the Stream media switch (for model P10, P10Pro, P12Pro), or select the Rear camera view in Default booting display (for model P12Pro max).

1. Power on the dash cam and ensure that your phone is in close proximity to it.
2. Open the WiFi list on your phone and locate the network name, which includes the model name of the dash cam.
3. Select the dash cam's Wi-Fi network and enter the default password "12345678" to establish the connection.
4. Once connected, you can access the dash cam's settings through the corresponding app.

1. Please ensure that no antivirus, VPN software, or hotspot is enabled on your phones, as they may potentially interfere with the connection and overall performance of the dashcam.
2. If the first tip does not resolve the issue, please attempt to connect using another phone. Before doing so, ensure that you forget the dashcam's WiFi network from your current phone.

Typically, dash cams are designed to be viewed when you are in the vicinity of your vehicle. The camera connects to its dedicated WiFi network, and you can access its live feed and recorded footage within the range of this network. So, if you're not in your car or not within the range of the camera's WiFi signal, you wouldn't be able to access the video feed in real-time.

The purpose of the parking mode is to ensure that activities are recorded with very low power consumption. When your vehicle is hardwired and the parking mode is enabled, only the recording function operates based on your settings. Other features will not be activated in this mode.

For Android phones, once connected to the dash camera's WiFi, it cannot support another internet connection, such as WiFi or mobile data or listen to some online music. However, the dash cam will continue recording even when connected to the phone. Therefore, you can only connect to the app when you wish to view or download the videos.

The purpose of the app is to facilitate easier management of settings, as well as viewing and downloading videos. It's important to note that once the dash cam is powered on, it will continue recording even when connected to the phone. Therefore, you may connect to the app when you wish to view or download the videos.

Currently, the app does not support the feature of restoring deleted videos.

Dash cams typically don't connect directly to home WiFi networks. Instead, they generate their own WiFi signal that is compatible only with the corresponding app.

You can install the GPS module in the area above the rearview mirror, near the large plastic housing at the top of the windshield, or on the quarter-light window of the front doors, positioned at the bottom and as close to the front of the car as possible. However, it's essential to note that placing it too close to the dash cam may result in signal interference.